Technical Data:
| Number of analog inputs | 4 |
| Total number of channels (module) | 4 |
| Signal type | Resistance measurement Potentiometer positions |
| Signal type (configurable) | yes |
| Sensor connection | 4 x (2-wire, 3-wire, 4-wire) |
| Data width | 4 x 16-bit data; 4 x 8-bit control/status (optional) |
| Resolution (over entire range) | 0.1 °C (over the entire range); 0.01 °C (–50 … 150 °C; Pt1000, Ni1000) |
| Conversion time (typ.) | 100ms |
| Conversion time | Per channel: ≤ 100 ms (2-/4-wire connection), ≤ 200 ms (3-wire connection) |
| Measurement error (25 °C) | ≤ ±0.6 K (Pt100, Pt200, Pt500, Ni100, Ni120); ≤ ±0.2 K (Pt1000, Ni1000); ±0.3 … 0.7 Ω for resistance measurement |
| Measuring current (typ.) | ≤ 350 µA |
| Response time (max.) | 3s |
| Sensor types | Pt100; Configurable: Pt200, Pt500, Pt1000, Ni100, Ni120, Ni1000 (TK6180 + TK5000), Potentiometer: 10R … 1k2, 10R … 5k0 |
| Temperature range | −200 … +850 °C (Pt100, Pt200, Pt500, Pt1000), −60 … +250 °C (Ni100, Ni1000), −80 … +260 °C (Ni120) |
| Configuration options | WAGO-I/O-CHECK CODESYS Library e!COCKPIT |
| Supply voltage (system) | 5 VDC; via data contacts |
| Current consumption (5 V system supply) | 85mA |
| Supply voltage (field) | 24 VDC (-25 … +30 %); via power jumper contacts (power supply via blade contact; transmission (field side supply voltage only) via spring contact) |
| Isolation | 500 V system/field |
| Indicators | LED (1-4) green: Status R1 … R4; LED (5-8) red: Error R1 … R4 |
| Number of incoming power jumper contacts | 2 |
| Number of outgoing power jumper contacts | 2 |
